High Tech Armor Flex Pet Door for Doors
- Energy-efficient pet door with a flexible flap
- Magnetic airtight seal can withstand high winds while being easy for dogs to use
- Aluminum-framed panel for sturdy installation
- Comes with a secure locking cover
- Available in sizes small to extra large
Product Details
The High Tech Pet Armor Flex Pet Door for Doors is an energy-efficient pet door made with a premium aluminum frame and an innovative flap. The flexible flap made from interlocking segments that provide horizontal rigidity to fully compress seal the sides of the flap while still allowing the vertical flexibility needed for easy and safe pet use. The extreme weather pet flap is made from high-strength ABS composite that can withstand frequent use and is also lined with a series of magnets that hold the flap closed against strong winds. The frame features industrial grade, heavy-gauge aluminum construction. Each Armor Flex door is finished with a durable power coating that resists scratches, wear and tear, and will remain beautiful for years to come.
Features:
- A matrix of rare earth magnets that holds the flap closed in high winds.
- A unique flap design made with energy efficiency in mind.
- The flexible flap is safe for pets to use.
- Aluminum framing is sturdy and can withstand heavy use.
- Comes with sturdy locking cover for maximum security.
- Available in sizes small to extra large.
Benefits:
- Energy-efficient design ensures that your home stays insulated year-round.
- Flexible flap is safe to use.
- Larger sizes allow pets of differing sizes to share the pet door.
- Built to last a lifetime.
Size Chart
- Small 6.38"w x 13.5"h
- Medium 8.25"w x 17.25"h
- Large 10.5"w x 21.25"h
- Extra Large 12.5"w x 25"h
Flap Dimensions:
6.38"w x 13.5"h
The entry way your dog goes through.Outside Frame Dimensions
10.88"w x 17.75"h
The outer edge of the pet door.
Rough Cut Out:
9.38"w x 16.31"h
The size of the hole needed to fit your pet door into your door.Flap Dimensions:
8.25"w x 17.25"h
The entry way your dog goes through.Outside Frame Dimensions
13.5"w x 22"h
The outer edge of the pet door.
Rough Cut Out:
11.25"w x 20"h
The size of the hole needed to fit your pet door into your door.Flap Dimensions:
10.5"w x 21.25"h
The entry way your dog goes through.Outside Frame Dimensions
14.88"w x 25.5"h
The outer edge of the pet door.
Rough Cut Out:
13.38"w x 24"h
The size of the hole needed to fit your pet door into your door.Flap Dimensions:
12.5"w x 25"h
The entry way your dog goes through.Outside Frame Dimensions
17"w x 29.25"h
The outer edge of the pet door.
Rough Cut Out:
15.5"w x 27.88"h
The size of the hole needed to fit your pet door into your door.| Size | Flap Dimensions | Outside Frame Dimensions | Rough Cutout Dimensions | Recommended Pet Height |
|---|---|---|---|---|
| Small | 6.38" x 13.5" | 10.88" x 17.75" | 9.38" x 16.31" | 12" - 19" |
| Medium | 8.25" x 17.25" | 13.5" x 22" | 11.25" x 20" | 12" - 25" |
| Large | 10.5" x 21.25" | 14.88" x 25.5" | 13.38" x 24" | 12" - 31" |
| Extra-Large | 12.5" x 25" | 17" x 29.25" | 15.5" x 27.88" | 12" - 38" |
Find The Best Pet Door Size For My Pet
A
Pet Height: inches
B
Pet Width: inches
Installation Instructions
Difficulty
Moderate
Steps
07
Time Required
1-2 hours
Sections
01
Flags
00
Parts
- Main Door Assembly
- Outside Bezel
- Security Panel
- #10 X 1-1/4” Long, Phillips Oval Head, Stainless Steel Mounting Screws (Small, 22; Medium, 26; Large, 32; Extra Large, 32)
- Screw Anchors for screws above (Small, 22; Medium, 26; Large, 32; Extra Large, 32)
Tools
- #1 Phillips screwdriver
- Electric jigsaw
- Electric drill
- #21 (.159”) drill bit (for solid wood door installations)
- 1/4” drill bit (for hollow core doors)
- Level
- Safety glasses
Step 1 Measure Your Dog's Height
- Measure your dog’s shoulder height.
- The top of your rough cut-out should be 4” higher than your dog’s shoulder height such that the bottom of your rough cut-out is at least 3” above the floor (see Figure 1).
- Position your cut-out to the higher of the two conditions.
Step 2 Mark the Rough Cutout
- Using a level for the top edge, draw the rough cut-out rectangle on your door using the chart pictured.
Step 3 Cut the Opening
- Drill a 3/8” hole on the inside of each corner.
- Use a jigsaw to cut out the opening.
- Start at one of the corner holes and saw out the rough opening.
Step 4 Drill the Outside Mounting Holes
- Place the bezel in the opening you cut in the outside of your door.
- Then, trace each mounting hole circle with a pencil.
- Remove the bezel and drill a mounting hole in the center of each circle you traced.
- The screw anchors included are recommended for hollow core doors.
- If you are planning to use the screw anchors, drill the holes with a 1⁄4” drill bit.
- If you will be screwing directly in to a solid wood door use a size #21 (.159”) drill bit.
- For hollow core doors, insert a screw anchor in each hole on the outside of your door or wall.
Step 5 Install the Main Assembly
- Reinstall the bezel and screw it into place using the Mounting Screws provided.
- With the bezel in place, insert the Main Door Assembly into inside of the opening you made in your door.
- Then, trace each mounting hole circle with a pencil.
Step 6 Insert Screw Anchors
- Remove the Main Door Assembly and drill a mounting hole in the center of each circle you traced.
- Use a 1⁄4” drill bit if you are using the screw anchors.
- If you will be screwing directly in to a solid wood door use a size #21 (.159”) drill bit.
- Insert a screw anchor into each hole.
Step 7 Secure the Main Door Assembly
- Reinstall the Main Door Assembly and screw it into place using the Mounting Screws provided.
- Insert the Security Panel into the Main Door Assembly.
Videos
FAQ
|
Can this be installed in a wall? This is the door mount version, it can be installed in a wall with the addition of tunnel connectors. You can also purchase the Armor Flex Wall Mount here. |
|
Is this pet door good for harsh weather? Yes, this pet door is excellent for harsh weather. The interlocking flap segments create horizontal rigidity to compress seals on the sides of the flap, meaning no air can get through. The power coating finish withstands scratching and wear and tear. |
|
What is the flap made of? The flap is made of strong ABS composite. |
|
How much does shipping cost? Shipping is calculated at checkout. |
Warranty
All of our products carry a full one-year warranty (with the exception of replacement collar key batteries. If your product fails to operate at any time, for any reason, within one year of the original delivery date we will repair or replace it at our expense, no questions asked. If it doesn't work, send it back, get another one.
Guidelines:
Your product must be returned to High Tech Pet Products and must be clean and free of pet hair, dust and dander. Items that are dirty or containing pet hair and requiring cleaning will be subject to a charge equal to 25% of the original purchase price. We will ship the repaired or replaced product back to you via FedEx Ground or USPS priority mail, at our expense however, you are responsible for the cost of shipping the defective product to us.
In no case will High Tech Pet Products arrange or pay for the shipping of the defective product from your location to ours. Should you request the product to be sent out via air service, we will be happy to accommodate your request however, you will be required to pay the entire cost of the expedited service. ALL products, including pet doors, must be returned to us before we send out a replacement unit.
We must receive and examine the defective unit before the repaired or replaced unit is shipped out to you. There are no exceptions to this policy. When returning a product for repair or replacement, you must allow at least 1 – 2 weeks for replacement plus shipping time each way. In some cases, especially for special order items, the replacement time may be longer.
Customer Reviews
- Reviews
- Questions
United StatesWeather tight flap design (staff review)
Edge of flap is lined with magnets to seal the flap shut. This design make it wind resistant. Quality aluminum frame for long-lasting use.
United StatesNice Option for Doors (Staff Review)
This is a nice pet door option for doors. The flap is designed to be both insulating and comfortable for pets to use. It is lightweight enough for large and small pets to share.
Size Chart
- Small 6.38"w x 13.5"h
- Medium 8.25"w x 17.25"h
- Large 10.5"w x 21.25"h
- Extra Large 12.5"w x 25"h
Flap Dimensions:
6.38"w x 13.5"h
The entry way your dog goes through.Outside Frame Dimensions
10.88"w x 17.75"h
The outer edge of the pet door. Rough Cut Out:
9.38"w x 16.31"h
The size of the hole needed to fit your pet door into your door.Flap Dimensions:
8.25"w x 17.25"h
The entry way your dog goes through.Outside Frame Dimensions
13.5"w x 22"h
The outer edge of the pet door. Rough Cut Out:
11.25"w x 20"h
The size of the hole needed to fit your pet door into your door.Flap Dimensions:
10.5"w x 21.25"h
The entry way your dog goes through.Outside Frame Dimensions
14.88"w x 25.5"h
The outer edge of the pet door. Rough Cut Out:
13.38"w x 24"h
The size of the hole needed to fit your pet door into your door.Flap Dimensions:
12.5"w x 25"h
The entry way your dog goes through.Outside Frame Dimensions
17"w x 29.25"h
The outer edge of the pet door. Rough Cut Out:
15.5"w x 27.88"h
The size of the hole needed to fit your pet door into your door.| Size | Flap Dimensions | Outside Frame Dimensions | Rough Cutout Dimensions | Recommended Pet Height |
|---|---|---|---|---|
| Small | 6.38" x 13.5" | 10.88" x 17.75" | 9.38" x 16.31" | 12" - 19" |
| Medium | 8.25" x 17.25" | 13.5" x 22" | 11.25" x 20" | 12" - 25" |
| Large | 10.5" x 21.25" | 14.88" x 25.5" | 13.38" x 24" | 12" - 31" |
| Extra-Large | 12.5" x 25" | 17" x 29.25" | 15.5" x 27.88" | 12" - 38" |
Find The Best Pet Door Size For My Pet
A
Pet Height: inches
B
Pet Width: inches
Installation Instructions
Difficulty
Moderate
Steps
07
Time Required
1-2 hours
Sections
01
Flags
00
Parts
- Main Door Assembly
- Outside Bezel
- Security Panel
- #10 X 1-1/4” Long, Phillips Oval Head, Stainless Steel Mounting Screws (Small, 22; Medium, 26; Large, 32; Extra Large, 32)
- Screw Anchors for screws above (Small, 22; Medium, 26; Large, 32; Extra Large, 32)
Tools
- #1 Phillips screwdriver
- Electric jigsaw
- Electric drill
- #21 (.159”) drill bit (for solid wood door installations)
- 1/4” drill bit (for hollow core doors)
- Level
- Safety glasses
Step 1 Measure Your Dog's Height
- Measure your dog’s shoulder height.
- The top of your rough cut-out should be 4” higher than your dog’s shoulder height such that the bottom of your rough cut-out is at least 3” above the floor (see Figure 1).
- Position your cut-out to the higher of the two conditions.
Step 2 Mark the Rough Cutout
- Using a level for the top edge, draw the rough cut-out rectangle on your door using the chart pictured.
Step 3 Cut the Opening
- Drill a 3/8” hole on the inside of each corner.
- Use a jigsaw to cut out the opening.
- Start at one of the corner holes and saw out the rough opening.
Step 4 Drill the Outside Mounting Holes
- Place the bezel in the opening you cut in the outside of your door.
- Then, trace each mounting hole circle with a pencil.
- Remove the bezel and drill a mounting hole in the center of each circle you traced.
- The screw anchors included are recommended for hollow core doors.
- If you are planning to use the screw anchors, drill the holes with a 1⁄4” drill bit.
- If you will be screwing directly in to a solid wood door use a size #21 (.159”) drill bit.
- For hollow core doors, insert a screw anchor in each hole on the outside of your door or wall.
Step 5 Install the Main Assembly
- Reinstall the bezel and screw it into place using the Mounting Screws provided.
- With the bezel in place, insert the Main Door Assembly into inside of the opening you made in your door.
- Then, trace each mounting hole circle with a pencil.
Step 6 Insert Screw Anchors
- Remove the Main Door Assembly and drill a mounting hole in the center of each circle you traced.
- Use a 1⁄4” drill bit if you are using the screw anchors.
- If you will be screwing directly in to a solid wood door use a size #21 (.159”) drill bit.
- Insert a screw anchor into each hole.
Step 7 Secure the Main Door Assembly
- Reinstall the Main Door Assembly and screw it into place using the Mounting Screws provided.
- Insert the Security Panel into the Main Door Assembly.
Videos
FAQ
|
Can this be installed in a wall? This is the door mount version, it can be installed in a wall with the addition of tunnel connectors. You can also purchase the Armor Flex Wall Mount here. |
|
Is this pet door good for harsh weather? Yes, this pet door is excellent for harsh weather. The interlocking flap segments create horizontal rigidity to compress seals on the sides of the flap, meaning no air can get through. The power coating finish withstands scratching and wear and tear. |
|
What is the flap made of? The flap is made of strong ABS composite. |
|
How much does shipping cost? Shipping is calculated at checkout. |
Warranty
All of our products carry a full one-year warranty (with the exception of replacement collar key batteries. If your product fails to operate at any time, for any reason, within one year of the original delivery date we will repair or replace it at our expense, no questions asked. If it doesn't work, send it back, get another one.
Guidelines:
Your product must be returned to High Tech Pet Products and must be clean and free of pet hair, dust and dander. Items that are dirty or containing pet hair and requiring cleaning will be subject to a charge equal to 25% of the original purchase price. We will ship the repaired or replaced product back to you via FedEx Ground or USPS priority mail, at our expense however, you are responsible for the cost of shipping the defective product to us.
In no case will High Tech Pet Products arrange or pay for the shipping of the defective product from your location to ours. Should you request the product to be sent out via air service, we will be happy to accommodate your request however, you will be required to pay the entire cost of the expedited service. ALL products, including pet doors, must be returned to us before we send out a replacement unit.
We must receive and examine the defective unit before the repaired or replaced unit is shipped out to you. There are no exceptions to this policy. When returning a product for repair or replacement, you must allow at least 1 – 2 weeks for replacement plus shipping time each way. In some cases, especially for special order items, the replacement time may be longer.
- Reviews
- Questions
United StatesWeather tight flap design (staff review)
Edge of flap is lined with magnets to seal the flap shut. This design make it wind resistant. Quality aluminum frame for long-lasting use.
United StatesNice Option for Doors (Staff Review)
This is a nice pet door option for doors. The flap is designed to be both insulating and comfortable for pets to use. It is lightweight enough for large and small pets to share.
